ALARM FUNCTION TABLE
Except during power loss, the red alarm light illuminates whenever there is an alarm status.
Display Status
Cabinet temperature is displayed.
FF is displayed.
Temperature flashing on and off.
Control panel beeps every 5
seconds.
Alternating: "b" and temperature.
Control panel beeps every 5
seconds.
Alternating: "d" and temperature.
Control panel beeps every 5
seconds.
Alternating: E and temperature.
Control panel beeps every 5
seconds.
Alternating: CE and temperature.
Control panel beeps every 5
seconds.
Display off. Control panel beeps
every minute.
Function
Normal Operation
Quick Freeze
Freezer temp. too high
Low/no battery
Door ajar
Operational error
Operational error
Power failure
10
Response
None
None
Check power is connected. Contact
service technician. Press ALARM
RESET to shut off audible alarm (beep).
Replace 9V battery. Press ALARM
RESET to stop audible alarm (beep).
Close door. Press ALARM RESET to
stop audible alarm (beep).
Contact service technician. Press
ALARM RESET to stop audible alarm
(beep).
Reconnect power connection. Press
ALARM RESET to stop audible alarm
(beep).