Specifications General Specifications - Amprobe ACD-6 Pro User Manual

6) SPECIFICATIONS
GENERAL SPECIFICATIONS
Display : 3-3/4 digits 4000 counts LCD display(s)
Update Rate : 3 per second nominal
Polarity : Automatic
Low Battery : Below approx. 2.4V
Operating Temperature : 32!F TO 104!F (0!C TO 40!C)
Relative Humidity : Maximum relative humidity 80% for temperature up to 31!C decreasing
linearly to 50% relative humidity at 40!C
Altitude : Operate below 6,562ft (2000m)
Storage Temperature : -4
Temperature Coefficient : nominal 0.15 x (specified accuracy)/
- 104!F (0 C -18
O O
Sensing : Average sensing for ACD-6 PRO; True RMS for ACD-6 TRMS PRO
Safety : Meets IEC61010-2-032(1994), EN61010-2-032(1995), UL3111-2-032(1999).
Category III 600 Volts ac & dc.
Transient protection : 6.5kV (1.2/50"s surge) for all models
Pollution degree : 2
E.M.C. : Meets EN61326(1997, 1998/A1), EN61000-4-2(1995), and EN61000-4-3(1996)
In an RF field of 3V/m:
Total Accuracy = Specified Accuracy + 45 digits
Performance above 3V/m is not specified
Overload Protections :
ACA Clamp-on jaws : AC 1000A rms continuous
+
& COM terminals (all functions) : 600VDC/VAC rms
Power Supply : One 3V coin battery (ANSI/NEDA-5004LC, IEC-CR2032)
Power Consumption : ACD-6 Pro: 2.2 mA typical
APO Timing : Idle for 30 minutes
APO Consumption : 40"A typical on all model functions except that 190"A typical on ACD-
6 TRMS PRO voltage & current functions
Dimension : L224mm X W78mm X H40mm
Weight : 220 gm approx
Jaw opening & Conductor diameter : 45mm max
Accessories : Test leads (pair), batteries installed, user's manual, & soft carrying pouch
F to 140ºF (-20
O
C or 28 C -40 C), or otherwise specified
O O
ACD-6 TRMS Pro: 2.8mA typical
C to 60 C), < 80% R.H. (with battery removed)
O O
C @ 32!F - 64!F OR 82!F
O
11