Intel IoT Gateway Development KitDK200 Series Getting Started Manual page 70

ifconfig slcan0 up
cansniffer slcan0
4. Ensure the slcan interface is up on a third terminal, and on this terminal, invoke
cangen
commands:
ifconfig slcan0 up
cangen slcan0 -g 100
You will see the traffic detected by the sniffer.
®
Intel IoT Gateway Development Kit DK200 Series
Getting Started Guide
70
Intel IoT Gateway Development Kit DK200 Series —Installing and Using CAN
to generate CAN traffic and send at 100 ms intervals. Use the following
April 2015
Order No.: 330295-004