Notes On Installation; Model Numbers; Data Plate; Distance To The Range Hood - Miele HR 1421 Installation Instructions Manual

Model numbers

A list of the ovens described in these
operating instructions can be found on
the back page.

Data plate

The data plate is behind the toe-kick.
The toe-kick cover is attached to the
base of the range by magnets so it can
be removed and put back again easily.
There you can find the model number,
the serial number and the connection
data (voltage/frequency/maximum rated
load) for your range.
Have this information available when
contacting Miele Technical Service.

Distance to the range hood

The minimum clearance between the
appliance and a range hood above will
be listed by the hood manufacturer.
If the hood manufacturer's instructions
are not available or if flammable objects
are installed over the appliance (e.g.,
cabinets, utensil rail, etc.), a minimum
safety distance of 30" (760 mm) must
be maintained.
If there is more than one appliance
installed below the range hood, each
with a different safety clearance, the
largest clearance must be used.

Notes on installation

Items included with this range

The range is supplied with:
– Installation Instructions,
– Multiple operating instructions
(depending on model) for:
– Electric Range
– Induction Range
– Convection Oven
– Gas Cooktop
– Gas Convection Oven
– Speed Oven
– Warming Drawer
– an anti-tip device including screws
for fastening the range,
– various accessories.
13