CITROEN DS3 Handbook page 116

displays in the instrument panel
When you move the lever in the gate to select
a position, the corresponding indicator is
displayed in the instrument panel.
P. Park
R. Reverse
N. Neutral
d. Drive (Automatic driving)
S. Sport programme
T. Snow programme
1 2 3 4. G ears engaged during manual
operation
-. Invalid value during manual operation
Foot on brake
F Press the brake pedal when this
indicator lamp is displayed in the
instrument panel (e.g.: starting
the engine).
Moving off
F Apply the parking brake.
F Select position P or N.
F Start the engine.
If this procedure is not followed, there is an
audible signal, accompanied by the display of
an warning message.
F With the engine running, press the brake
pedal.
F Release the parking brake.
F Select position R, d or M.
F Gradually release the brake pedal.
The vehicle moves off immediately.
If position N is selected inadvertently
while driving, allow the engine to
return to idle then select position d to
accelerate.
If the ambient temperature is below
-23°C, the engine should be left at idle
for four minutes, to ensure the correct
operation and life of the engine and
gearbox.
When the engine is running at idle, with
the brakes released, if position R, d or
M is selected, the vehicle moves even
without the accelerator being pressed.
When the engine is running, never
leave children in the vehicle without
supervision.
When carrying out maintenance with
the engine running, apply the parking
brake and select position P.