Gigabyte GA-990FXA-UD7 User Manual page 50

& VIA 1394 Controller
Enables or disables the onboard IEEE 1394 function. (Default: Enabled)
& OnChip SATA Controller (AMD SB950)
Enables or disables the integrated SATA controllers. (Default: Enabled)
& OnChip SATA Type (AMD SB950, SATA3 0~3 connectors)
Enables or disables RAID for the SATA controllers integrated in the Chipset or configures the SATA controllers
to AHCI mode.
Native IDE Configures the SATA controller to IDE mode.
Enables RAID for the SATA controller.
RAID
AHCI C onfigures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
& OnChip SATA Port4/5 Type (AMD SB950, SATA3 4/SATA3 5 connectors)
This option is configurable only when OnChip SATA Type is set to RAID or AHCI. Configures the operating
mode of the integrated SATA3 4~SATA3 5 connectors.
As SATA Type The mode depends on the OnChip SATA Type settings.
IDE Configures the SATA3 4~SATA3 5 connectors to IDE mode. (Default)
& HD Audio Azalia Device
Enables or disables the onboard audio function. (Default: Enabled)
If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to
Disabled.
& Onboard USB Device
Enables or disables the integrated USB controller. (Default: Enabled)
& Onboard LAN Controller
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
& F_USB30 Controller (Etron
board F_USB30 header)
Enables or disables the Etron
& Onboard GSATA Controller (Marvell
Enables or disables the SATA controller integrated in the Marvell
& R_USB3.0 Controller (Etron
panel)
Enables or disables the Etron
& Onboard eSATA Controller (Marvell
panel)
Enables or disables the SATA controller integrated in the Marvell
& Legacy USB Support
Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled)
& XHCI Hand-off
Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off
support. (Default: Enabled)
BIOS Setup
EJ168 USB Controller, USB 3.0/2.0 ports routed to the on-
®
EJ168 USB controller. (Default: Enabled)
®
88SE9172 chip, GSATA3 6/GSATA3 7 connectors)
®
EJ168 USB Controller, USB 3.0/2.0 ports on the back
®
EJ168 USB controller. (Default: Enabled)
®
88SE9172 chip, eSATA connectors on the back
®
- 50 -
88SE9172 chip. (Default: Enabled)
®
88SE9172 chip. (Default: Enabled)
®