Appendix D Troubleshooting; When The Server Blade Does Not Start - HP ProLiant BL40p Setup And Installation Manual

For a list of new server error messages that are specific to this server, refer to
Appendix C, "Server Error Messages."
For information on LEDs and switches specific to the server blade, refer to
Appendix E, "LEDs and Switches."
For information about general troubleshooting techniques, diagnostic tools, error
messages, and preventative maintenance, refer to the HP ProLiant Servers
Troubleshooting Guide on the Documentation CD.

When the Server Blade Does Not Start

This section provides systematic instructions on what to try and where to go for help
for the most common problems encountered during initial POST. The server blade
must first complete this test each time you power up, before it can load the operating
system and start running software applications.
IMPORTANT: Always be sure that you have adequate system power applied to all rack
components before troubleshooting the server blade. You may need to add more hot-plug
power supplies if you are installing additional server blades. If you have a power problem, refer
to the HP ProLiant BL p-Class System Overview and Planning white paper.
HP ProLiant BL40p Server Blade Setup and Installation Guide
Troubleshooting
D
D-1