Table of Contents
Advertisement
Indicating the computer to use for the NFS user mapping server
During the processes of starting and installing the NAS server, the name localhost is assigned
by default to the computer. It is assumed that the NAS server is the computer that will be used
for user name mapping.
If there are other mapping servers and a machine other than the localhost that will store user
name mappings, the name of that computer must be indicated, as detailed below:
1. Use Remote Desktop to access the NAS Management Console, click File Sharing,
2. In the Computer name box of the user-mapping screen, type the name of the computer
3. Localhost is the computer name assigned by default on the NAS server. To control user
Note:
service is installed and running on that machine.
Note:
mappings, including Primary Domain Controllers, Backup Domain Controllers, and Active Directory
Domains, then domain user name mappings will not work correctly.
Figure 54: Microsoft Services for NFS screen, Settings tab
NAS 1500s and 500s Administration Guide
Microsoft Services for Network File System. Click Settings.
the Server for NFS user interface.
designated for user mapping and authentication.
mapping from a different computer, enter the name of that computer.
If a machine other than the localhost is to be used, make sure that the user name mapping
If the authentication software is not installed on all domain controllers that have user name
Microsoft Services for NFS
Figure 54
is an example of
111
Advertisement
Table of Contents
