Additional Safety Instructions For Lasers; Safety Of Others; Vibration - Black & Decker SMS254 Manual

ENGLISH
•
Risk of injury when changing the blade.
•
Risk of squeezing fingers when opening the
guards.
•
Health hazards caused by breathing dust
developed when sawing wood, especially
oak, beech and MDF.
Warning! If the electronic brake fails to work,
have your power tool serviced by a qualified
repair agent. Call Black & Decker customer
services for your nearest service agent.
Additional safety instructions
for lasers
This laser complies with class 1M according the
IEC 60825-1:2007. Do not replace a laser diode
with a different type. If the laser is damaged,
have the laser repaired by an authorised repair
agent. Do not use the laser for any purpose
other than projecting laser lines.
•
Never look into the laser beam directly and
intentionally.
•
Do not used optical tools to view the laser
beam.
•
Do not set up the tool where the laser beam
can cross any person at head height.
•
Do not let children come near the laser.
Warning! Avoid direct eye contact. Laser
radiated when laser guide is turned on. Always
unplug the mitre saw from power source before
making any adjustment.
•
A laser pointer is not a toy and should not
come into hands of children. Misuse of this
appliance can lead to irreparable eye
injuries.
10
•
Any adjustment to increase the laser power is
forbidden. Any liability for damages as a
result of not following these safety
instructions will be rejected.
•
When using the laser pointer, do not point the
laser beam towards people and/or reflecting
surfaces. Even a laser beam of lower
intensity may cause eye damage. Therefore,
do not look directly into the laser beam.
•
The laser pointer includes no servicing
components. Do not open the housing
otherwise the guarantee is void.

Safety of others

•
This tool is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they have
been given supervision or instruction
concerning the use of the appliance by a
person responsible for their safety.
•
Children should be supervised to ensure that
they do not play with the appliance.

Vibration

The declared vibration emission values stated in
the technical data and the declaration of
conformity have been measured in accordance
with a standard test method provided by EN
61029 and may be used for comparing one tool
with another. The declared vibration emission
value may also be used in a preliminary
assessment of exposure.
Warning! The vibration emission value during
actual use of the power tool can differ from the
declared value depending on the ways in which
the tool is used. The vibration level may increase
above the level stated.