Using The Tv's Features; Tv Operation; Setting The Language - RCA 14B042 User Manual

Using the TV's Features

TV Operation

1. To turn on the TV, press the POWER button.
2. The VOLUME can be adjusted to a desired level by pressing the VOL (VOLUME)
indicated on the TV screen.
3. Set the ANTENNA menu option to the appropriate setting. When shipped from the factory, this menu option is set to
CABLE. See "Setting Channels".
TV - VHF/UHF channels
CABLE - CABLE TV channels
4. CH (CHANNEL) /
at the next channel set into memory. Press and hold the button down to change channels more quickly.
For proper operation, before selecting channels, they should be set into the TV's memory. See "Setting Channels".
0-9 (Direct Channel Selection buttons) Press these buttons to select a channel. The channel number will appear on
the upper right corner of the TV screen. If an invalid channel number is selected, the display will revert to the previous
channel.
TV mode direct channel selection When the ANTENNA menu option is set to AIR, all channels can be instantly
selected by using two buttons (For example, to select channel 2, press "0", then "2". If you press only "2", channel
selection will be delayed for a few seconds). For channels 10 and above, press the 2 digits in order.
CATV mode direct channel selection When the ANTENNA menu option is set to CABLE, channels can be selected as
follows:
1-9 Press "0" twice, then 1-9 as needed. For example, to select channel 2, press "002".
10-12 Press "0", then the remaining 2 digits. For example, to select channel 12, press "012".
13-99 Press the 2 digits in order. For example, to select channel 36, press "36".
100-125 Press the 3 digits in order. For example, to select channel 120, press "120".
Note: If the station being viewed stops broadcasting, the TV will automatically shut off after 15 minutes.

Setting the Language

This TV can display the on screen displays and picture adjustments in English, Spanish or French.
1. Press the MENU button (the Main menu appears).
2. Press the PROG. or
3. Press the VOL or
French (FRANCAIS).
4. Press the MENU button to exit.
Note: If Spanish or French is chosen, the Closed Caption indicators will be in the selected language, but the Closed
Caption text will not be affected by the language selection.
8
buttons Press and release the CH (CHANNEL)
button to highlight EXTRA, then use the PROG. buttons again to highlight LANGUAGE.
button to change the language to the desired setting: English (ENGLISH), Spanish (ESPAÑOL), or
or button. The sound level will be
or button. The channel automatically stops