Inserting The Card - Epson Stylus CX7700 Basic Manual

Inserting the Card

1. Make sure the Epson Stylus CX7700 is turned on.
Note: When you print directly from a memory card, it is best if the Epson Stylus
CX7700 is not connected to your computer (or your computer is turned off).
2. Open the memory card door.
3. Make sure the memory card access light is off and that no cards are in any of
the slots, then insert your card into the correct slot.
The memory card access light flashes and then stays on.
4. Close the memory card door. Now you can:
■
Print an index sheet so you can select which photos to print (page 22)
■
Print all the photos on the card (page 24)
■
Print photos pre-selected on your camera using DPOF (page 24)
20
Printing From a Memory Card
Memory card
access light