Setting The Configuration File (/Etc/System) - Fujitsu Eternus Connection Manual

Chapter 3 Setting Up the Server
>

3.3 Setting the Configuration File (/etc/system)

To set multiple ports, repeat the above procedure for each port.
3.3 Setting the Configuration File (/etc/system)
Procedure
1
2
3
4
P3AM-4562-01ENZ0 ETERNUS Disk storage systems Server Connection Guide for Oracle Solaris
• Frame data size confirmation
# bcu port --dfsize 1/0
Port maximum receive data field size is 2048 -
Edit the configuration file.
Edit the configuration file (/etc/system) and specify the command queue depth.
The appropriate "ssd_max_throttle" parameter value is determined by the ETERNUS Disk
storage system model, as follows:
ETERNUS Disk storage system
ETERNUS2000
ETERNUS4000
ETERNUS8000
Specify the command queue depth for the "ssd_max_throttle" parameter.
Add the "ssd_max_throttle" parameter if it does not exist.
Example
set ssd:ssd_max_throttle = 20
After editing the configuration file, save it.
After the setting is complete, check the configuration file for incorrect settings.
Reboot the server.
# /usr/sbin/shutdown -y -g0 -i6
Command queue depth setting
8
20
20
14
End of procedure
End of procedure
Copyright 2010 FUJITSU LIMITED