Front Panel - Cisco SF220-24 Quick Start Manual

Model
SF220-48P
SG220-26
SG220-26P
SG220-50
SG220-50P

Front Panel

The ports, LEDs, and Reset button are located on the front panel of the
switch.
Left Side
SF220-24 24-Port 10/100 Smart Plus Switch
SG220-50P 50-Port Gigabit PoE Smart Plus Switch
RJ-45 Ethernet Ports—The RJ-45 Ethernet ports connect network
devices, such as computers, printers, and access points, to the switch.
SFP Ports—The small form-factor pluggable (SFP) ports are connection
points for modules so that the switch can link to other switches. These
ports are also commonly referred to as mini Gigabit Interface Converter
(miniGBIC) ports. The term SFP will be used in this guide.
• The SFP ports are compatible with Cisco modules MFEBX1, MFEFX1,
MFELX1, MGBLH1, MGBLX1, MGBSX1, MGEBX1, and MGBT1.
• The SFP port is shared with one other RJ-45 port, called a combo port.
When the SFP port is active, the adjacent RJ-45 port is disabled.
• The LEDs of the corresponding RJ-45 ports flash green to respond to
the SFP port traffic.
Cisco 220 Series Smart Plus Switches Quick Start Guide
Description
48-Port 10/100 PoE Smart Plus
Switch
26-Port Gigabit Smart Plus
Switch
26-Port Gigabit PoE Smart Plus
Switch
50-Port Gigabit Smart Plus
Switch
50-Port Gigabit PoE Smart Plus
Switch
Ports
48 FE Copper + 2 GE
Combo
24 GE Copper + 2 GE
Combo
24 GE Copper + 2 GE
Combo
48 GE Copper + 2 GE
Combo
48 GE Copper + 2 GE
Combo
Right Side
G1 G2
100M
G49 G50
PoE
SFP
SFP
3