Cisco SF220-24 Quick Start Manual page 11

reconnect the devices for them to discover their new IP
addresses from the DHCP server.
Details on how to change the IP address on your computer
N
OTE
depend upon the type of architecture and operating system that
you are using. Use your computers local Help and Support
functionality and search for "IP Addressing."
Open a web browser window. If you are prompted to install an
S 5
TEP
Active-X plug-in when connecting to the device, follow the
prompts to accept the plug-in.
Enter the switch IP address in the address bar and press Enter. For
S 6
TEP
example, http://192.168.1.254.
When the login page appears, choose the language that you prefer
S 7
TEP
to use in the web-based interface and enter the username and
password.
The default username is cisco. The default password is cisco.
Usernames and passwords are both case sensitive.
Click Log In.
S 8
TEP
If this is the first time that you have logged on with the default
username and password, the Change Password page opens.
Enter a new password and confirm the password.
S 9
TEP
Password complexity is enabled by default. The password
N
OTE
must comply with the default complexity rules or it can be disabled
temporarily by selecting Disable Password Strength
Enforcement.
Click Apply.
S 10
TEP
Make sure that any configuration changes made are saved
C
AUTION
before exiting from the web-based interface by clicking on
the Save icon. Exiting before you save your configuration will
result in all changes being lost.
The Getting Started page opens. You are now ready to configure
the switch. Refer to the
Administration Guide
Cisco 220 Series Smart Plus Switches Quick Start Guide
Cisco 220 Series Smart Plus Switches
or see the help pages for further information.
11