TP-Link TL-WA750RE User Manual page 10

TL-WA750RE
LED Explanation:

Name Status
On
RE Blinking The Range Extender is establishing a connection with your router.
Off
Blinking The wireless function is working properly.
Wireless
Off
On
Power
Off
On
Ethernet
Off
On
Signal
Blinking
Strength
Off
(RANGE EXTENDER/WPS): If your Wireless router or AP supports WPS or QSS

function, you can press the WPS or QSS button and then press the RANGE EXTENDER
button to establish a secure connection between the Wireless router (or AP) and the Range
Extender TL-WA750RE.
RESET: This button is used to restore the Range Extender's factory default settings.

There are two ways to reset the Range Extender's factory defaults:
Method One: With the Range Extender powered on, use a pin to press the RESET button
until all the LEDs turn on momentarily, then release the button and wait the Range Extender
to reboot to its factory default settings.
Method Two: Restore the default settings from "System Tools > Factory Defaults" of the
Range Extender's Web-based management page.
ETHERNET: One 10/100Mbps RJ45 Ethernet port used to add wireless connectivity to an

Ethernet-enabled device such as Internet TV, DVR, Gaming console and so on. Please note
that this port is not allowed to be connected with router or AP.
150Mbps Universal Wi-Fi Range Extender User Guide
The Range Extender is connected to your router.
The Range Extender is not connected to your router.
The wireless function is not working.
The Range Extender is on.
The Range Extender is off.
The Ethernet port is connected.
The Ethernet port is not connected.
The number of lit LEDs indicates the strength of wireless signal.
A connection to your router has been established, but no Internet
access yet.
The Range Extender is not connected to your router.
Table 1-1
3
Indication