Adjusting The Head Restraints Manually; Adjusting The Fore/Aft Position Of The Head Restraint; Adjusting The Height Of The Head Restraints Electrically - Mercedes-Benz GLA Operator's Manual

as intended. There is an increased risk of
injury in the head and neck area, e.g. in the
event of an accident or when braking.
Always drive with the head restraints instal-
led. Before driving off, make sure for every
vehicle occupant that the center of the head
restraint supports the back of the head at
about eye level.
Using the fore-and-aft adjustment, adjust the
head restraint so that it is as close as possible
to your head.
General notes
For vehicles with sports seats you cannot
adjust the front head restraints or the outer
rear head restraints.

Adjusting the head restraints manually

Adjusting the head restraint height
To raise: pull the head restraint up to the
X
desired position.
To lower: press release catch : in the
X
direction of the arrow and push the head
restraint down to the desired position.
Adjusting the fore/aft position of the
head restraint
With this function you can adjust the distance
between the head restraint and the back of
the seat occupant's head.
To adjust forwards: pull the head restraint
X
forwards in the direction of the arrow until
it engages.
There are several notches.
To move backwards: press and hold
X
release button : and push the head
restraint backwards.
When the head restraint is in the desired
X
position, release the button and make sure
that the head restraint is engaged in posi-
tion.
Adjusting the height of the head
restraints electrically
To adjust the head restraint height: slide
X
the switch for head restraint adjustment
( page 98) up or down in the direction of
Y
the arrow.
Seats
99
Z