Hardware Installation
The EAP can be wall or ceiling-mounted and can be powered via a PSE device
or the provided power adapter. Please suitably arrange your wire layout before
mounting the EAP.
1. Installation Requirements
Before installation, check the package contents for the following items:
EAP120/EAP220
Wing Nuts (3)
Other installation equipments may require, including a pencil, ruler, drill, drill bit,
hammer, screwdriver and a ladder.
2. Mounting Bracket
The following figure describes the structure of the mounting bracket.
ARROW 2 is used to align
with ARROW 1 under the
interface panel
Ceiling mounting slot
Wall mounting slot
Locking clip
Mounting Bracket
Plastic Wall
Washers (3)
Anchors (3)
Mounting Bracket
Installation Guide
S e l f- t a p p i n g
P a n - h e a d
Screws (3)
Screws (3)
04