Wired Login - TP-Link EAP120 Installation Manual

Step 2: Wireless Access
1. Make sure the management host is set to obtain an IP address
automatically.
2. Join the wireless network using the default SSID TP-LINK_2.4GHz_XXXXXX or
TP-LINK_5GHz_XXXXXX, where XXXXXX represents the last 6 characters of
the EAP's MAC address. Password is not required.
Step 3: Quick Setup
Open a web browser and type in http://tplinkeap.net to access the EAP's
1.
web management page. Use admin (all lowercase) for both username and
password to login. Please note that in Cluster mode, the login will be directed
to the Master EAP.
2. Create a new user name and password.
3. Follow the step-by-step instructions to complete the Quick Setup. Any
configurations you make to the Master EAP will automatically synchronize to all
the other EAPs.
Note: If you change the default SSID and password during the Quick Setup, you
will need to reconnect to the EAP using the new SSID and password to perform
more advanced configurations.
Congratulations! Now you can enjoy the wireless network with TP-LINK EAP Series.
Option 2: Wired Login
Master EAP
Cluster
Internet
Router
Switch
Member EAP
Management Host
Member EAP
12