Input Dealer Contact Information - Aprilaire 8570 Safety And Installation Instructions Manual

5. INPUT DEALER CONTACT INFORMATION

During thermostat operation, the two multi-function buttons
are labeled INFO and MENU. When the INFO button is
pressed, the thermostat will display the humidity and
temperature sensed by the AHC (if an AHC has not been
installed the Aprilaire logo screen will appear), then the
thermostat will display the thermostat model number and
contact information. At installation, the contact information is
blank and only the thermostat model number appears. You
have the option of inputting this contact information with the
name and number of your company. Twenty (20) characters
are available for your company name. Space for a telephone
number, including area code, is available.
To change the contact information:
1. Make sure the thermostat is in the OFF mode.
2. Press and hold both the L and M buttons for 3 seconds.
– The display will show the ADV. SETTINGS MENU.
3. Use the L or M button to highlight "INPUT DEALER INFO"
and press the SELECT button. This enters the company
name screen.
4. To cancel, press the BACK button. This returns to the
ADV. SETTINGS MENU. You must be at the first position
when pressing the BACK button to return to the
ADV. SETTINGS MENU.
5. To delete a character, press the BACK button.
6. To enter a letter in the name of the company, use the
L or M buttons to scroll through the available characters.
Press the SELECT button to enter the character. For spaces,
press SELECT.
7. To finish and go to the company number screen,
repeatedly press SELECT until all remaining characters have
been filled with spaces, then press SELECT again.
8. To delete a number, press the BACK button.
9. To enter a number, use the L or M buttons to scroll
between the available characters. Press the SELECT button
to enter the character. The full 10-digit telephone number
must be entered.
10. To finish, press the SELECT button after entering the
10th digit.
- 33 -