Set The Configuration Dip Switches On The Thermostat Circuit Board - Aprilaire 8570 Safety And Installation Instructions Manual

(4) SET THE CONFIGURATION DIP SWITCHES ON THE THERMOSTAT CIRCUIT BOARD

There are four dip switches
located on the back of the
thermostat (on the circuit
board) that must be set to
properly configure the
thermostat for operation
with the equipment it is to
control. Figure 5 shows
the default position for the
four switches.
6504
GAS
MULTI
- 6 -
AHC
ELEC
SINGLE
H/C
HP
Figure 5