Advertisement
Batteries, wallplate, date and time
Installing batteries
1.
Install the two AA alkaline
batteries supplied on the back
of the thermostat.
2. Locate and remove the tab
labelled 'Remove'. This tab
MUST BE removed in order to
set the real-time clock.
Mounting thermostat to
wallplate
1.
Align the terminal screw
blocks with the pins on the
back of the thermostat.
2. Push thermostat straight onto
the wallplate until it snaps into
place.
Setting calendar and time
This thermostat is designed, under
normal use, to automatically keep
current time and day in memory
for up to ten years once the
calendar is set. There are two ways
to set the calendar and time for
this thermostat.
-
setting date/time when
thermostat is first powered
-
setting date/time after
thermostat is already
functioning
Setting date/time when
thermostat is first powered
When the thermostat is first
powered, the display is ready to
set the calendar and time. The
thermostat proceeds through a
sequence of setup screens.
Setting date/time after
thermostat is already
functioning
Use the installer setup (next page)
to set year, month, and day—refer
next page
Batteries (2)
Battery holder
Back of thermostat
Installing batteries
Month
Year
Mon
6
2012
System & Fan
Override
Go back key
Next key
Goes back to
Advance to
last setting
next setting
Setting calendar and time after initial power up
Remove tab
Day
15
Up and down keys
Changes month, day,
year and time
More
Done key
Advances to time setting
screen and home screen
iHeat thermostat installation guide: 12064-A 01-13 | 5
Advertisement
