Erase Section (Erase Sec); Create - Pioneer DVR-520H Operating Instructions Manual

Editing

Erase Section (Erase Sec)

VR mode
Using this command you can delete a part of a Play List
title, ideal for cutting out the commercial breaks in a
recording made from the TV.
1 Select 'Erase Sec' from the Disc Navigator menu
options.
2 Use the (cursor buttons) to select a
title.
After selecting a title, the Erase Sec screen appears from
which you can mark the start and end points of the
section to erase.
Erase Sec
Play List
DVD
15:00 Wed 13/12 2ch
Title 1
Recording Time
Erase Sec
Back
3 Use the playback controls ( , ,
find the start of the section to erase, then (with
'From' highlighted) press ENTER.
The bar at the bottom of the screen shows the current
play position in the title. After pressing ENTER, a marker
appears under the bar to show the start of the section.
A
4 In the same way, find the end of the section to
erase, then (with 'To' highlighted) press ENTER.
After pressing ENTER, another marker appears under the
bar to show the end of the section, with the section itself
marked in red.
5 Select 'Yes' to confirm, or 'No' to cancel, then
press ENTER.
In the thumbnail viewer you can see a few seconds of
video either side of the marked section to see how the
edit will look.
6 Erase another section from the same title, or
press RETURN to get back to the main Disc Navigator
screen.
LP
0h01m24s
1-2 0.00.52.17
Play Pause
A B
From To
, , etc.) to
Play Pause
A B
From T
0.02.09.17

Create

VR mode
Use this function to add an Original title to the Play List.
When you do this, the whole title is put into the Play List
(you can erase bits you don't need later—see Chapter Edit
(Chpt Edit) on page 84).
The title appears in the Play List complete with the
chapter markers that appear in the Original. However, if
you add more chapter markers to the Original later, these
are not automatically copied over into the Play List title.
You can add up to 99 titles to the Play List.
1 Select 'Create' from the Disc Navigator Play List
menu options.
2 Use the (cursor buttons) to select the
insertion point for the new title, then press ENTER.
Disc Navigator
Play List
DVD 1
Create
Move
Divide
Combine
Erase All
Undo
If there are no titles in the Play List yet, this step does not
apply.
3 Use the (cursor buttons) to select an
Original title to put into the Play List.
Disc Navigator
Play List
DVD
ORG1
12:30 Wed15/11 2ch LP
Create
ORG4
Move
Divide
Combine
Erase All
Undo
2
DVD Remain
0h37m(FINE)
1/1
ORG2 ORG3
DVD Remain
0h37m(FINE)
1/1
08
85
En