Residual Risks; Markings On Tool; Package Contents - DeWalt DW862 Original Instructions Manual

WARNING:: ALWAYS USE SAFETY
GLASSES. Everyday eyeglasses are
NOT safety glasses. Also use face or
dust mask if cutting operation is dusty.
WARNING: A Portable Residual Current
Device (PRCD) is provided on the cord
set. Receptacles are available having
built in PRCD protection and may be
used for an added measure of safety.
When using an extension cord, always
plug into a PRCD protected receptacle
or outlet.
WARNING: Always plug extension
cord into a PRCD protected outlet.
WARNING: Test PRCD before each
use:
1. Plug PRCD into power outlet.
Indicator should turn red.
2. Press test button.
Red indicator should disappear.
3. Press reset button for use.
Do not use if above test fails.
WARNING: To reduce the risk of
electrocution, keep all connections dry
and off the ground. Do not touch plug
with wet hands.
WARNING: Never use saw with salt
water or a conductive fluid.

Residual Risks

• The following risks are inherent to the use of
these machines:
– Injuries caused by touching the rotating
parts.
– Injuries caused by disruption of the cutting
disc.
• These risks are most evident:
– Within the range of operation.
– Within the range of the rotating machine
parts.
• In spite of the application of the relevant
safety regulations and the implementation of
safety devices, certain residual risks cannot be
avoided. These are:
– Impairment of hearing.
– Risk of accidents caused by the uncovered
parts of the rotating cutting disc.
– Risk of injury when changing the disc.
– Risk of squeezing fingers when opening the
guards.

Markings on Tool

The following pictograms are shown on the tool:
Read instruction manual before use.
Wear eye protection.
Wear ear protection.
DATE CODE POSITION (FIG. 1)
The date code (r), which also includes the year of
manufacture, is printed into the housing.
Example:
2014 XX XX
Year of Manufacture

Package Contents

The package contains:
1 Tile Cutter
1 Wet Kit
1 Spanner
1 Socket Wrench
1 Instruction manual
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1, 2)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. Shoe
b. Trigger switch
c. Lock-on button
d. Diamond blade (sold separately)
e. External flange
f. Clamping screw
g. Water tubing
h. Tool inlet
i. Water tubing adapter
j. Water valve lever
k. Tapping screw
EN GL IS H
7