VXL-3m Wiring Diagram
MOTOR
10 • 1/16 E-REVO VXL
TRAXXAS TQ 2.4GHz RADIO & VELINEON POWER SYSTEM
Your model is equipped with the Traxxas TQ 2.4GHz transmitter.
The transmitter has two channels: Channel one operates the
steering, and channel two operates the throttle. The receiver
inside the model has three output channels. Your model is
equipped with one servo and an electronic speed control.
TRANSMITTER AND RECEIVER
Red/Green Status LED
Set Button
Steering
Trim
Throttle
Trigger
Power Switch
Battery Compartment
MODEL WIRING DIAGRAM
Antenna
Steering Wheel
Receiver
CH3 - Channel 3*
CH2 - Speed Control
CH1 - Steering Servo
CH1 - Channel 1*
*Not used.
VXL-3m ELECTRONIC SPEED CONTROL
To Motor
EZ-Set
Button
Channel 1
Steering Servo
Motor
(Velineon
®
380)
Channel 2
VXL-3m
Electronic
Speed Control
High-Current
Connector
High-Current
Battery Connector
Heat Sinks
LED