Basic Commands (Direct Access); Lock; Unlock - Clifford 4706X Responder LC3 Owner's Manual

Remote start and keyless entry system

Hide thumbs Also See for 4706X Responder LC3:

Owner's manual (25 pages)

Table Of Contents

Table of Contents

Basic commands (Direct Access)

Lock

Press and release

The doors lock and the horn honks (if connected) and

parking lights ﬂash once. The

and the System Status Icons update. If Valet mode* is On the doors

lock and the

VALET

system normally.

If the door was open when locking, you are notiﬁed of an active zone

immediately after locking the system. The horn in the vehicle "honks"

again. The 2-way remote control sounds a short "error" tone, and the

LCD displays the door icon.

Note: the optional door input and horn honk must be connected for

the system to give notiﬁcation.

To Lock and Panic

Press and hold

The system Locks (or Locks in Valet) and, after 2 seconds, sounds

the horn and ﬂashes the parking lights. The

and horn honks to conﬁrm. Press the

output.

Unlock

Press and release

The doors unlock (if connected), and the horn honks (if connected)

and parking lights ﬂash twice. The

conﬁrm and the system status icons update. If Valet mode* is On the

doors unlock and the

LOCKED

text and tone play. Exit Valet mode to Lock the

UNLOCKED

text and tone play.

VALET

text and beeps play to conﬁrm

PANIC

button to stop the

text and beeps play to

ALL

6:30

text displays

Table of Contents

Basic Commands (Direct Access); Lock; Unlock - Clifford 4706X Responder LC3 Owner's Manual

Basic commands (Direct Access)

Lock

Unlock

Related Manuals for Clifford 4706X Responder LC3

Related Content for Clifford 4706X Responder LC3

Table of Contents