3
Screen Setup
3.5
Image Size
Change the picture size.
3.5.1 Changing the Image Size
1
Press any button on the front of the product to display the Key Guide. Next, press [
the corresponding menu screen.
2
Press [
3
Press [
appear.
Auto: Display the picture according to the aspect ratio of the input source.
Wide: Display the picture in full screen regardless of the aspect ratio of the input source.
- The functions available on the monitor may vary depending on the model.
PICTURE
Brightness
Contrast
Sharpness
SAMSUNG
MAGIC Bright
Image Size
Response Time
H-Position
4:3: Display the picture with an aspect ratio of 4:3. Suitable for videos and standard broadcasts.
16:9: Display the picture with an aspect ratio of 16:9.
Wide: Display the picture in full screen regardless of the aspect ratio of the input source.
Screen
Changing the screen size is available when the following conditions are satisfied.
] to move to
PICTURE
and press [
] to move to
Image Size
PICTURE
Brightness
Contrast
Sharpness
SAMSUNG
MAGIC Bright
Image Size
Response Time
H-Position
:
:
:
: Custom
4 : 3
:
16 : 9
:
Screen Fit
:
AUTO
Fit: Display the picture with the original aspect ratio without cutting off.
A digital output device is connected using the DVI/DP cable.
The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally (Not every
model can support all of these signals. ) .
] on the product.
and press [
] on the product. The following screen will
:
:
:
: Custom
:
Auto
Wide
:
:
AUTO
PICTURE
Brightness
100
Contrast
75
Sharpness
60
SAMSUNG
MAGIC Bright
Image Size
Response Time
H-Position
50
MENU
] to display
100
75
60
50
:
:
:
: Custom
4 : 3
:
Wide
:
Screen Fit
:
AUTO
3 Screen Setup
100
75
60
50
51