Programmable Models Only (8463, 8465, 8466); Set Time And Day; Understanding Program Schedules - Aprilaire 8400 series Owner's Manual

OpERATION & pROgRAmmINg –

SET TImE AND DAy

1 . press to enter time setting mode. Hour and
AM/PM are flashing.
2 . press or
3 . press
, the minutes flash. press
to adjust the minutes.
4. press
, the day flashes. press
to adjust day.
5. press to end. "DONE" will display.
The thermostat will return to normal mode if no key is
pressed within 3 seconds.
8
61000651B 8400 Tstat Owners.indd 8

pROgRAmmAblE mODElS ONly (8463, 8465, 8466)

to adjust the hour.
or
or

UNDERSTANDINg pROgRAm SCHEDUlES

The daily schedule is split into four sections:
wAKE: 6am-8am – Temperature you would prefer to
wake up to, until you leave for the day.
lEAVE: 8am-5pm – Temperature when you are away
from the house during the day.
RETURN: 5pm-10pm – Temperature you would prefer to
return to, until bedtime.
SlEEp: 10pm-6am – Temperature you would prefer
during the night.
The times shown are the defaults. The start time and
temperature of each section can be changed to fit your
schedule (see page 10).
This thermostat is pre-set to use EnergyStar
settings (see the chart that follows). We recommend
these settings, since they can reduce your heating/
cooling expenses.
program
®
7/23/09 10:43:05 AM