Alert Notification; External Device Control; Dual Lane Operation - Panasonic WX-CH450 Operating Instructions Manual

Alert notification

When the Center Module is WX-CC411 or WX-CC412, store
personnel wearing this product can send a security alert to
the Center Module.
Hold down the [F] button for 2 seconds or
more.
A beep is heard from the earphone, indicating that
the transmission is complete, and a security alert is
sent to the Center Module.
When the Center Module receives a security
alert from this product, it is possible to
perform a preset operation (TALK & PAGE
Recording, Send E-Mail, alert message
playback, Camera Monitoring, etc.).

External device control

When the Center Module is WX-C3010, you can control the
external device control terminal of the Center Module using
this product.
Hold down the [F] button.
A short beep is heard from the earphone and the
external device control terminal of the Center Module
enters the ON state.
Release the [F] button.
2 short beeps are heard from the earphone and the
external device control terminal of the Center Module
enters the OFF state.

Dual lane operation

In dual lane operation, this product must select a lane for
communication.
For Normal setup
Switching to Lane B
When a connection is made to Lane A, the lane indicator is
lit in orange.
Press the [T2] button.
A voice of "Lane B" is heard from the earphone and
the lane indicator is lit in green. The connection is
changed to Lane B.
Switching to Lane A
When a connection is made to Lane B, the lane indicator is
lit in green.
Press the [T2] button.
A voice of "Lane A" is heard from the earphone and
the lane indicator is lit in orange. The connection is
changed to Lane A.
For Direct Lane Select setup
Switching to Lane B
When a connection is made to Lane A, the lane indicator is
lit in orange.
Press the [T2] button.
A voice of "Lane B" is heard from the earphone and
the lane indicator blinks green. The connection is
changed to Lane B. You can talk with a customer at
the menu board of Lane B.
Switching to Lane A
When a connection is made to Lane B, the lane indicator is
lit in green.
Press the [T1] button.
A voice of "Lane A" is heard from the earphone and
the lane indicator blinks orange. The connection is
changed to Lane A. You can talk with a customer at
the menu board of Lane A.
13