Attaching the Rubber Feet
Use rubber feet provided. Position and apply rubber feet to the
underside of the DGS-1016D/1024D Switch.
Provide for Adequate Ventilation
Attaching the Rubber Feet
CAUTION: Do not place any device on top of Switch, or
place the Switch on top of any device or object that will
block the free flow of air through the ventilation slots on
the sides, top, and bottom of the Switch's case. In
addition, care should be taken not to locate the Switch
next to, on top of, or underneath any device that
generates a significant amount of heat. For the Switch to
perform at its optimal level, the Switch must have
adequate
ventilation
overheating and becoming damaged.
to
prevent
the
Switch
from