Inserting/Removing The Battery; Charging And Recording Time - Panasonic HC-X1000 Owner's Manual

1
Connect the AC cable to the battery charger and the AC outlet.
≥ Use the AC cable (K2CA2CA00025; supplied) dedicated for the battery charger.
2
Insert the battery into the battery charger by aligning the arrows.
≥ We recommend using Panasonic batteries (l 12, 20, 21, 47).
≥ If you use other batteries, we cannot guarantee the quality of this product.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with
doors and windows closed.

Inserting/removing the battery

Install the battery by inserting it in the direction shown in the figure.
Insert the battery until it clicks and locks.

Charging and recording time

Charging/Recording time
≥ Temperature: 25 oC (77 oF)/humidity: 60%RH
≥ When using the viewfinder (times in parentheses are when using the LCD monitor)
Battery model
number
[Voltage/Capacity
(minimum)]
Supplied battery/
VW-VBD58 (optional)
[7.2 V/5800 mAh]
≥ Please refer to "Owner's Manual (PDF format)" for details.
Charging Recording
time mode
6 h 20 min MP4 (LPCM) [4K/60p 150M]
Removing the battery
Make sure that the power switch is set to OFF
and the status indicator is turned off, and then
remove by holding onto it taking care not to
drop. (l 25)
While pressing the battery release button,
remove the battery.
Maximum
Recording continuously
format recordable
4 h 30 min
(4 h 15 min)
Actual
recordable
time
time
2 h 20 min
(2 h 15 min)
(ENG) SQT0477
21