[Input] Menu; Switching The Input Source - Panasonic PJLink PT-LW330 Operating Instructions Manual

[Input] menu

To select the input source directly by pressing the input selection buttons on the remote control or to select the
input source in the [Input] screen by pressing the <INPUT/ENTER> button on the control panel.

Switching the input source

When using the remote control
1) Press the input selection (<COMPUTER 1>, <COMPUTER 2>, <HDMI>, <VIDEO>, <MEMORY VIEWER/
USB DISPLAY>) buttons.
f To project the corresponding input signal of the selected terminal.
<COMPUTER 1>
<COMPUTER 2>
<HDMI>
<VIDEO>
<MEMORY VIEWER/
USB DISPLAY>
When using the control panel
1) Press the <INPUT/ENTER> button.
f The [Input] screen is displayed.
2) Switches the input source by pressing as to select one item and then press the <ENTER> button.
f To project the corresponding input signal of the selected terminal.
[Computer]
*1
[Computer 1]
*2
[Computer 2]
*2
[HDMI]
[Component]
[Video]
[S-video]
[Memory Viewer]
*2
[USB Display]
*2
*1 Only for PT-LB300 and PT-LB280.
*2 Only for PT-LW330, PT-LW280, PT-LB360 and PT-LB330.
Note
f [Computer 2] is not available when [Setting] menu → [Terminal] is set to [Monitor out].
48 - ENGLISH
Chapter 4 Settings - [Input] menu
Switches to Computer 1/Component input.
Switches to Computer 2 input.
Switches to HDMI input.
Switches to Video/S-video input.
Switches to Memory Viewer/USB Display input.
Switches to Computer input.
Switches to Computer 1 input.
Switches to Computer 2 input.
Switches to HDMI input.
Switches to YP P /YC C input.
B R B R
Switches to Video input.
Switches to S-video input.
Switches to Memory Viewer input.
Switches to USB Display input.
PT-LW330, PT-LW280,
PT-LB300, PT-LB280
PT-LB360, PT-LB330