Cadillac ELR 2014 Owner's Manual page 39

4. Insert the vehicle key into the
key cylinder above the license
plate.
5. Open the trunk.
6. Turn the key counterclockwise
five times within 10 seconds.
7. The DIC displays READY FOR
REMOTE KEY 3 or 4, up to 8.
8. Remove the rubber liner to
access the pocket. Place the
new transmitter on the indent in
the center console storage bin.
9. Press the POWER
10. The DIC displays READY FOR
REMOTE KEY 4 or 5, up to 8.
Q
11. Press or on each newly
programmed transmitter to
complete the process.
Keys, Doors, and Windows
12. To program additional
transmitters, repeat
Steps 8 11.
Return the key base back into
the RKE transmitter.
13. Press and hold the POWER
button for at least 12 seconds
to exit programming.
Programming without a
Recognized Transmitter
If there are no currently recognized
transmitters available, follow this
procedure to program up to eight
transmitters. This feature is not
available in Canada. This procedure
will take approximately 30 minutes
button.
to complete. The vehicle must be off
and all transmitters to be
programmed must be present.
2-5