Towing The Vehicle - Cadillac ELR 2014 Owner's Manual

Hide thumbs Also See for ELR 2014:
Table of Contents

Advertisement

10-76
Vehicle Care
2. Disconnect the black negative
( ) jumper cable from the ELR.
3. Disconnect the red positive (+)
jumper cable from the ELR. Do
not let the other end of the cable
touch anything until after the
next step.
4. Disconnect the red positive (+)
jumper cable from the other
vehicle.
5. Return the positive (+) and
negative ( ) terminal covers to
their original positions.

Towing the Vehicle

Caution
Incorrectly towing a disabled
vehicle may cause damage to the
vehicle. The disabled vehicle
should be towed on a flatbed car
carrier. Use care when there is
low ground clearance and/or
special equipment. Attempting to
pull the vehicle onto a flatbed
without following the proper steps
could damage the vehicle.
Consult your dealer or a
professional towing service if the
disabled vehicle must be towed.
To load a vehicle onto a flatbed
carrier:
1. The vehicle must be on a flat
surface.
2. The front tires must be properly
inflated. If necessary, move a
rear tire to the front to replace a
flat or damaged tire.
3. Place the tow chain hooks (2)
into one of the torque box
openings (1) behind the front
wheels.

Advertisement

Table of Contents
loading

Table of Contents