Selecting A Monitor; Selecting And Controlling A Dvmre/Multiplexer - GE Interlogix KTD-405 User Manual

Controller keypads
Table of Contents

Advertisement

KTD-405/405A User Manual
5.2.4.2 F
OCUS
For auto focus, press the auto focus key. To focus manually, use the + focus - key.
5.2.4.3 I
RIS
The iris is controlled by the + iris - key; + opens the iris, - closes the iris.
Note: Refer to the CyberDome manual for additional operation on some CyberDome models.
5.2.5 S
M
ELECTING A
Press the mon key.
1)
Enter the monitor number including any preceding zeroes, or
2)
Enter the monitor number directly, and then press
5.2.6 S
ELECTING AND
When a zone is active, the corresponding DVMRe/multiplexer can be controlled by the keypad. See
Table 5.
Table 5. Controlling a multiplexer
Control
Function for Multiplexer
starts record mode
starts playback mode (if multiplexer
has an attached DSR/VCR, a play
command is sent to the multiplexer
and the VCR)
stops playback or record mode
pauses live picture; pauses playback
toggles image between normal and
2X magnification (joystick moves
view)
1036547C / December 2003
ONITOR
C
DVMRe/M
ONTROLLING A
.
ULTIPLEXER
Function for DVMRe
starts record mode
starts playback mode
stops playback or record mode
pauses playback or live view
zooms image to 2X magnification (toggle)
calls up screen to search for specific
recording
puts DVMRe in playback mode
Operation
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ktd-405a

Table of Contents