1. Manuals
  2. Brands
  3. GE Interlogix Manuals
  4. Keypad
  5. KTD-405
  6. User manual

GE Interlogix KTD-405 User Manual

Controller keypads
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
KTD-405 and KTD-405A
Controller Keypads

Advertisement

Table of Contents
loading

Related Manuals for GE Interlogix KTD-405

Summary of Contents for GE Interlogix KTD-405

  • Page 1 KTD-405 and KTD-405A Controller Keypads...
  • Page 2 GE Interlogix, and used in accordance with the instruction Video Systems Group.

  • Page 3: Table Of Contents

    ................... 8 NSTALLATION UIDELINES 3.2 B ................. 9 ANEL ONNECTIONS 3.2.1 KTD-405 Connections ..................... 9 3.2.2 KTD-405A Connections....................10 3.3 I/O B ..................11 ONNECTIONS 3.3.1 RJ-Cable Connections....................11 3.3.2 Twisted-Pair Connections....................12 3.3.3 Connecting a Multiplexer or DVMRe and Domes............13 3.3.4 Connecting Multiple Keypads with RJ45 Cables............
  • Page 4 Table of Contents KTD-405/405A User Manual 5.1.2 Selecting a Camera ....................... 33 5.1.3 Controlling a Camera..................... 33 5.1.4 Selecting a Monitor ......................34 5.1.5 Operating Group Switching on Digiplex IV Switchers ........... 35 5.1.6 Controlling a DVMRe/Multiplexer .................. 35 5.1.7 Controlling a Recording Device ..................35 5.2 Z...

  • Page 5: Before You Begin

    Customer Support For assistance in installing, operating, maintaining, and troubleshooting this product, refer to this document and any other documentation provided. If you still have questions, please contact GE Interlogix Technical Support and Sales: GE Interlogix, Video Systems Group...

  • Page 6: Package Contents

    ACKAGE ONTENTS The KTD-405 and KTD-405A packages include a user manual (1036547) and a quick reference guide (1047307) in addition to the items shown in Figures 1 and 2. Read the manual before beginning installation and programming so that you can plan your system’s configuration.

  • Page 7: Operating Modes

    PERATING ODES ® The KTD-405 can be programmed to operate in either of two modes: standard Digiplex or zone (DVMRe/multiplexer/PTZ control). See Appendix C. Sample System Configurations. Be aware that the addressing between domes and multiplexers is offset. When setting up and controlling your cameras in zone mode, refer to Appendix A (Zone Receiver Site Addressing).

  • Page 8: Installation

    (e.g., keypads and cameras). Refer to device manuals for termination requirements and methods. • Your system should contain only one RS422 chain of devices. Only one KTD-405 keypad should be in that chain, which can contain any number of other keypads such as KTD-404s. 1036547C / December 2003...

  • Page 9: Ack Anel Onnections

    RS485 and RS422 in/out Power supply RS485 termination switch Power cord RJ45 control cable* *GE Interlogix uses two different RJ45 cables. You must use the RJ45 cable provided with the unit. Figure 6. KTD-405 back panel connections 1036547C / December 2003...

  • Page 10: Ktd-405A Connections

    RJ11 audio cable Power cord RS485 and RS422 in/out RJ45 control cable* Power supply *GE Interlogix uses two different RJ45 cables. You must use the RJ45 cable provided with the unit. Figure 7. KTD-405A back panel connections 1036547C / December 2003...

  • Page 11: I/O Box Connections

    RS485 (optional RJ45 connection*) (for GE Interlogix DVMRes, multiplexers, ProBridges, and additional KTD-405 I/O boxes) RS485 (optional RJ45 RS485 connection*) (for GE Interlogix DVMRes, multiplexers, ProBridges, and additional KTD-405 I/O boxes) KEYPAD (black RJ45 (...

  • Page 12: Twisted-Pair Connections

    Installation KTD-405/405A User Manual 3.3.2 T WISTED ONNECTIONS The twisted-pair connections are available to connect additional devices or for existing installations where individual wires were used to connect to the old phone-style I/O box. Easy-to-use RJ-cable connections are also available on the new I/O box. See section 3.3.1 RJ-Cable Connections.

  • Page 13: Connecting A Multiplexer Or Dvmre And Domes

    ASCII converters, or keypads (see guidelines)) if provided transformer not used) RS422 OUT (data out to devices such as domes, switchers, or keypads (other than KTD-405s)) Figure 10. Connecting a keypad (KTD-405 shown) to a multiplexer or DVMRe (shown) and domes 1036547C / December 2003...

  • Page 14: Connecting Multiple Keypads With Rj45 Cables

    PIN 3 to RS485 A other receivers to PIN 6 to RS485 B the RS422 output from any keypad. Note: PINs 2, 4, 5, 7, and 8 are not connected. Figure 11. KTD-405 and KTD-405A connections via RJ45 cables 1036547C / December 2003...

  • Page 15: Connecting Multiple Keypads With Stp Cable

    PIN 3 to RS485 A other receivers to PIN 6 to RS485 B the RS422 output from any keypad. Note: PINs 2, 4, 5, 7, and 8 are not connected. Figure 12. KTD-405 and KTD-405A connections via STP cable 1036547C / December 2003...

  • Page 16: Connecting New And Old I/O Boxes

    Installation KTD-405/405A User Manual 3.3.6 C I/O B ONNECTING EW AND OXES Adhere to all installation guidelines while making connections, including your local codes and those provided in section 3.1 Installation Guidelines. Note: For additional connection details about the old I/O boxes, see Appendix D. Old I/O Box Connections.

  • Page 17: Programming

    KTD-405/405A User Manual Programming ROGRAMMING There are three programming modes for the keypad: ! Supervisor Programming Mode: Establishes such essentials as the keypad’s nonvolatile memory, title, and PTZ-to-KB3 command communication. ! User Programming Mode: Establishes the keypad’s system architecture for operations.

  • Page 18: Entering The Programming Modes

    From the ENTER PROGRAMMING CODE menu, pressing 1-4-7-6-seq enters the supervisor menus. The RESET T0 DEFAULTS option erases data in the KTD-405’s nonvolatile memory and reloads factory values. RESET ALL clears programmed keypad and zone titles; RESET ALL BUT TITLES retains the zone titles;...
  • Page 19 KB3 PTZ PROTOCOL? "NEXT! (+)=YES (-)=NO If the KTD-405 is being used in a system that needs to communicate PTZ commands to a Calibur CBR-KB3/J keypad or ProBridge, you must select YES so that the KTD-405 communicates properly with these devices.
  • Page 20 Programming KTD-405/405A User Manual KEYPAD TITLE: (!,", "NEXT! , or or the joystick to title the keypad. Titles can include A through Z, 0 through 9, and spaces: or ! Moves from a space to A through Z, to 9 through 0.

  • Page 21: Soft Key Reprogramming

    KTD-405/405A User Manual Programming 4.2.1 S EPROGRAMMING From the supervisor programming mode you can reprogram any of the soft keys with any of the available commands. See Appendix B. Reprogrammable Keys and Commands for a list of the keys and commands.
  • Page 22 Programming KTD-405/405A User Manual At the confirm command selection display, press the ! side of the zoom, focus, or iris key to confirm the assignment of the command for the key or press '' to return to the PRESS KEY TO PROGRAM display.

  • Page 23: Ser Rogramming

    KTD-405/405A User Manual Programming ROGRAMMING From the ENTER PROGRAMMING CODE menu, pressing 5-7-9-seq enters the user menus: OPERATING MODE: DIGIPLEX "NEXT! (!,")=SELECT The operating mode defines the keypad’s system architecture. The choices are DIGIPLEX, which is conventional system operation, and ZONE, which divides the system into 32 zones.
  • Page 24 Programming KTD-405/405A User Manual The following access menus are used to restrict the keypad from addressing specified sites in the system. Note: The access menus enable you to allow access for each camera, monitor, DSR/VCR, and multiplexer. To move from one type of access menu to another, press ! or ".

  • Page 25: Zone Menus

    KTD-405/405A User Manual Programming For example, a keypad has a monitor that is connected to matrix switcher output 12. To enable the monitor to be addressed as monitor 1, subtract 1 from 12 and enter the difference (11) as the monitor offset.
  • Page 26 Programming KTD-405/405A User Manual ENTER ZONE ADDRESS: "NEXT! (01-32) Pressing ! takes you to the ZONE XX ACCESS menu, page 27. Entering a two-digit zone address displays the following menu: ZONE 01 TITLE: (!,", "NEXT! , or or the joystick to title the zone. Titles can include A through Z, 0 through 9, and spaces: or ! Moves from a space to A through Z, to 9 through 0.
  • Page 27 KTD-405/405A User Manual Programming The following system access menus are used to restrict the keypad from addressing specified sites in the system: ZONE 1 CAM 01 ACC? "NEXT! (+)=YES (-)=NO ZONE 1 MON 1 ACC? "NEXT! (+)=YES (-)=NO ZONE 01 RECORDER ACC? YES "NEXT!

  • Page 28: Emote Rogramming

    Programming KTD-405/405A User Manual EMOTE ROGRAMMING From the ENTER PROGRAMMING CODE menu, pressing 9-5-1-seq enables you to program system devices such as cameras and VCRs. Note: Remote programming can be denied by a supervisor. 1=SWITCHER/MPLX 2=ALARMS 3=CAMERA/RCVR EXIT! Note: To program an auxiliary device, refer to the relevant manual.

  • Page 29: Cyberscout Shadowtour

    KTD-405/405A User Manual Programming If you are in standard Digiplex mode, pressing 1 prompts you to enter a CyberDome site number: ENTER CYBERDOME SITE SEE MONITOR FOR MENUS "BACK NUMBER HOLD SEQ <3 SEC> TO EXIT If you are in a zone mode, pressing 1 prompts you to enter a CyberDome camera number within the current zone: Note: You must select the zone before entering programming mode.

  • Page 30: Operation

    2 stop aux 3 last for KTD-405; talk for KTD-405A aux 4 activates a sequence tour on the active monitor (Calibur multiplexers only) toggles active monitor between the alarm on and alarm off modes; calls up help menus when remotely programming matrix switcher and...

  • Page 31: Standard Digiplex Mode

    KTD-405/405A User Manual Operation Normal Function selects camera (selects any numeric entry following other keys) 0 – 9 places selected DSR, DVMRe, or VCR in fast forward mode toggles selected multiplexer’s full-screen picture between normal and 2X magnification locates video on selected DVMRe...
  • Page 32 Operation KTD-405/405A User Manual To navigate through the three menus, use " and !. To exit the system information menus, press " from the first menu or press esc. KEYPAD ADDRESS: VERSION 1.0.14 "NEXT! KEYPAD 99 AUG 6 2002 10:54:13...

  • Page 33: Selecting A Camera

    KTD-405/405A User Manual Operation lock light aux 2 flip site down aux 3 stabilize joystick down aux 4 function site up group home store step 0 lux find card volume up/down face + zoom - door 1 backlight bright/dim badge...

  • Page 34: Selecting A Monitor

    Operation KTD-405/405A User Manual 5.1.3.4 S ETTING A RESET Position the camera. Press store. Enter the preset number using the number keys, or aux 1, 2, 3, or 4 for presets 58 through 61. Note: Presets 62 and 63 cannot be set using the number keys; they can be set by using the keys only.

  • Page 35: Operating Group Switching On Digiplex Iv Switchers

    KTD-405/405A User Manual Operation 5.1.5 O IV S PERATING ROUP WITCHING ON IGIPLEX WITCHERS In Digiplex mode, while pressing esc, pressing zone displays the following menu: TOUR ENTER GROUP SEQUENCE ENTER MONITOR GROUP (1-12)__ (1-64)__ OR <TOUR> Entering a number from 1 through 64...

  • Page 36: Zone Mode

    Operation KTD-405/405A User Manual Control Function for DSR/VCR Function for DVMRe in play or pause mode right: fast forwards left: rewinds up: skips forward approximately 15 sec twisting right: steps forward at a down: skips backward approximately 15 sec variable rate...

  • Page 37: Selecting A Monitor

    KTD-405/405A User Manual Operation 5.2.4.2 F OCUS For auto focus, press the auto focus key. To focus manually, use the + focus - key. 5.2.4.3 I The iris is controlled by the + iris - key; + opens the iris, - closes the iris.
  • Page 38 Operation KTD-405/405A User Manual Control Function for Multiplexer Function for DVMRe when attached to a DSR/VCR in in play or pause mode right: fast forwards pause mode twisting right: steps forward at a left: rewinds variable rate up: skips forward approximately 15 sec...

  • Page 39: Controlling A Recording Device

    KTD-405/405A User Manual Operation Table 6. Navigating Calibur menus Control Function Joystick moves left and right within menu options; can be used to move up and down within the menu options makes selections " backspaces out of selections; exits the programming menus if pressed in the main menu...

  • Page 40: Programming Advmre/Multiplexer Camera Sequence

    Operation KTD-405/405A User Manual 5.2.8 P DVMRe/M ROGRAMMING A ULTIPLEXER AMERA EQUENCE If you are using a Calibur DVMRe/multiplexer, you can set a camera sequence: Press store. Press seq. The following menu appears: ENTER SEQUENCE CAMERA " CANCEL DONE ! Enter the number of the first camera in the sequence.

  • Page 41: Two-Way Audio

    KTD-405/405A User Manual Operation 5.3.2 T UDIO To establish two-way audio communication with a site: Press 0 through 9 to enter a site number. Use the vol (volume) keys to adjust the audio level. Press aux 4 to talk to the site. The aux 4 key on the audio-version of the keypad automatically defaults to talk mode.

  • Page 42: Troubleshooting

    RS422 control line with installation instructions and correct wiring along a switcher and data merger RS422 control line. With the KTD-405 keypad, the units should be in line in the following order: keypad, data merger, and switcher. Unclear audio on audio...
  • Page 43 KTD-405/405A User Manual Troubleshooting No or poor control of dome Poor voltage or resistance on If the wiring, addressing, and termination of the the data line camera and keypad are all correct: • Verify that the voltage along the RS422 data line reads approximately 1.5 VDC and that it drops...

  • Page 44: Appendix A. Zone Receiver Site Addressing

    Appendix A. Zone Receiver Site Addressing KTD-405/405A User Manual A. Z PPENDIX ECEIVER DDRESSING Each receiver has a DIP switch used to assign its site address. In zone operation, to determine the receiver site address, see Table A1, Table A2, and Figure A1 and perform the following: Determine which position values must be added together to equal the site number.
  • Page 45 KTD-405/405A User Manual Appendix A. Zone Receiver Site Addressing Figure A1. Zone address 209 (128 + 64 + 16 + 1) One way to determine which switches to use is to subtract the highest possible switch value from the address you want, then subtract the highest possible switch value from that difference. Continue to subtract the highest possible switch value from the difference until you have zero.

  • Page 46: Appendix B. Reprogrammable Keys And Commands

    Appendix B. Reprogrammable Keys and Commands KTD-405/405A User Manual B. R PPENDIX EPROGRAMMABLE EYS AND OMMANDS Recommended set Complete set Figure B1. Keys that can be reprogrammed Table B1. Commands that can be assigned to reprogrammed keys Name Name Name...

  • Page 47: Appendix C. Sample System Configurations

    KTD-405/405A User Manual Appendix C. Sample System Configurations C. S PPENDIX AMPLE YSTEM ONFIGURATIONS KTD-450 D IGIPLEX ONFIGURATION Video RS422 RS485 Keypads (with I/O boxes) DVMRe Monitors CyberDomes Matrix video switcher Figure C1. Sample KTD-405 Digiplex mode configuration 1036547C / December 2003...

  • Page 48: Ktd-405A Digiplex Configuration

    Appendix C. Sample System Configurations KTD-405/405A User Manual KTD-405A D IGIPLEX ONFIGURATION Video RS422 RS485 Audio KTD-405A (with I/O box) Monitors DVMRe Relay follow Matrix video switcher CyberDomes Speakers Figure C2. Sample KTD-405A Digiplex mode configuration 1036547C / December 2003...

  • Page 49: Digiplex Hybrid Configuration

    KTD-405/405A User Manual Appendix C. Sample System Configurations IGIPLEX YBRID ONFIGURATION Video RS422 RS485 Keypads 1 and 2 Zone 1 DVMRe Monitors 1 through 4 Zone 2 DVMRe Matrix video switcher CyberDomes Figure C3. Sample Digiplex hybrid configuration 1036547C / December 2003...

  • Page 50: Zone Configuration

    Appendix C. Sample System Configurations KTD-405/405A User Manual ONFIGURATION Video RS422 RS485 Keypads (with I/O boxes) Zone 1 DVMRe Zone 1 monitors Zone 2 DVMRe CyberDomes Zone 2 monitors Figure C4. Zone with dedicated monitors 1036547C / December 2003...

  • Page 51: Appendix D. Old I/O Box Connections

    KTD-405/405A User Manual Appendix D. Old I/O Box Connections D. O I/O B PPENDIX ONNECTIONS I/O B ONNECTIONS FOR ONAUDIO UDIO ERSION EYPADS Audio-version I/O box Nonaudio-version I/O box Data Connections RS485 A RS485 B RS422 out B 12 VDC in (no polarity)

  • Page 52: Connecting A Multiplexer Or Dvmre To The Old I/O Box

    Connect PIN 6 to RS485 B (BK) To Multiplexer or DVMRe RS422 output (ground at mux/DVMRe) (to CyberDomes/PTZ receivers Floating shield Connect PIN 1 to RS485 shield Figure D2. Connecting a keypad (KTD-405 shown) to a multiplexer or DVMRe (shown) and domes 1036547C / December 2003...

  • Page 53: Connecting Multiple Keypads To The Old I/O Box

    RS422 output (to CyberDomes) RJ11 to/from KTD-405A RJ45 to/from KTD-405 RS422 input To additional keypads or (from alarm chassis) multiplexer/DVMRe (ground at mux/DVMRe) Audio A Float shield in field Audio B Audio Connections: Figure D4. KTD-405 to KTD-405A connections 1036547C / December 2003...

  • Page 54: Appendix E. System Planning Guide

    Appendix E. System Planning Guide KTD-405/405A User Manual E. S PPENDIX YSTEM LANNING UIDE Device Details 1036547C / December 2003...
  • Page 55 KTD-405/405A User Manual Appendix E. System Planning Guide Device Details (continued) 1036547C / December 2003...
  • Page 56 Appendix E. System Planning Guide KTD-405/405A User Manual Device Details (continued) 1036547C / December 2003...
  • Page 57 KTD-405/405A User Manual Appendix E. System Planning Guide Device Details (continued) 1036547C / December 2003...
  • Page 58 Appendix E. System Planning Guide KTD-405/405A User Manual Device Details (continued) 1036547C / December 2003...
  • Page 59 KTD-405/405A User Manual Appendix E. System Planning Guide Device Details (continued) 1036547C / December 2003...

This manual is also suitable for:

Ktd-405a

Table of Contents