Dukane 6752WU User Manual page 185

1. Press the button to set the projector to the standby
mode, then disconnect the power cord.
Wait for the projector to fully cool off.
2. Press down on the buttons on the left and right and then
pull the filter cover towards you to open it.
The cover will open about 90 degrees before it stops.
3. Remove the filter unit by pulling out the tab.
4. Slowly insert the wireless LAN unit into the USB (LAN)
port.
• Remove the wireless LAN unit's cap, set the unit with the
front (the side with the indicator) facing upwards, hold the
back edge and insert the unit gently.
Next, press the wireless LAN unit in with a finger.
• The cap you have removed will be used when the wireless
LAN unit is removed, so store it in a safe place.
NOTE: If the wireless LAN unit is hard to insert, do not push it in by
force.
5. Mount the filter unit back onto the projector cabinet.
Insert the filter unit onto the projector with the sides on which
the left and right hooks are located on the outside.
6. Installation and Connections
Filter cover
Filter unit
Wireless LAN unit
Hook
171
Button
Tab