Troubleshooting
PROBLEM
Vacuum won't turn on
Vacuum won't pick up
or low suction
Dust escaping from
vacuum
POSSIBLE REASON
• Power cord not firmly
plugged in
• Blown fuse or tripped
breaker
• Needs service
• Vacuum bag full
• Clogged filter
• Hose clogged
• Bag compartment cover not
installed properly
• Filter not installed correctly
• Vacuum bag not installed
correctly
Any other service should be done by an
Authorized Service Representative.
Service 1-888-9-SIMPLY
To locate your nearest retailer, visit our website at
www.simplicityvac.com
Problem Solving Guide
POSSIBLE SOLUTION
• Plug unit in firmly
• Check house fuse or
breaker. Replace fuse /
reset breaker.
• Take to Authorized Retailer
(1-888-9-SIMPLY)
• Install new bag
• Install new filter
• Remove obstacle
• Reinsert the cover and
secure latch
• Review filter installation
(page 12)
• Review bag installation
(page 11)
13