Technical Specifications - Skil 2412 Original Instructions Manual

Cordless drill/driver
INTRODUCTION

TECHNICAL SPECIFICATIONS

TOOL ELEMENTS
A
B
C
D
E
F
G Battery pack
H Battery release pack
J
K Ventilation slots
SAFETY
GENERAL SAFETY INSTRUCTIONS
WARNING! Read all safety warnings and all
instructions.
Save all warnings and instructions for future
reference.
operated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
c) Keep children and bystanders away while operating a
power tool.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools.
b) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators.
c) Do not expose power tools to rain or wet conditions.
electric shock.
d) Do not abuse the cord. Never use the cord for
¡ ¢ £ ¤ ¢ ¥ ¦ § ¨ ¦ ¤ ¥ ©      
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts.
2412
e) When operating a power tool outdoors,
use an extension cord suitable for outdoor use.
If operating a power tool in a damp location is
unavoidable, use an earth leakage circuit breaker.
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or medication.
b) Use personal protective equipment. Always wear
eye protection.
c) Prevent unintentional starting. Ensure the switch is
in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool.
on invites accidents.
d) Remove any adjusting key or wrench before turning
the power tool on.
e) Do not overreach. Keep proper footing and balance
at all times.
Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts.
If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct power
tool for your application.
b) Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
c) Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools.
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
6
 ¦     ¦  ¨  ¨   §   W ¦