6.8.3
Load Database
1. Insert the supplied cable into the USB port on the top right corner of the GTR/GNC.
2. Insert the USB memory device into the other end of the cable.
3. Press FUNC to access the Functions. Turn the LARGE knob to select the SYS function. Turn the
SMALL knob to view the Load Database function. Then, press the ENT key.
4. Verify the database version on USB. Then, press the ENT key. Updating will begin automatically.
6.9
Documentation Checks
6.9.1
Airplane Flight Manual Supplement
Ensure that the Airplane Flight Manual Supplement (AFMS) is inserted in the Airplane Flight Manual
(AFM) or Pilot's Operating Handbook (POH).
GTR 225/GNC 255 TSO Installation Manual
Page 6-22
Figure 6-27. Database Update Display
Figure 6-28. Verify Database Version
190-01182-02
Rev. B