THINGS YOU SHOULD KNOW
USER ORIENTATION
Your Executive MOBEX phone interfaces to the OfficeServ 7000 Series system in
two ways:
•
By logging in after receiving a MOBEX call, or
•
If configured, you may dial in to the system and log in to activate the inter-
face.
Both connection methods will be discussed in this booklet.
To get an outside line from the telephone company once connected, dial an access
code, usually the digit "9." To call an oth er station in your system, simply dial its
extension number. See your sys tem directory list for other access codes and exten-
sion numbers.
C.O. LINES
Lines from the telephone company are "C.O. lines." Calls on these lines are referred
to as "outside calls." These C.O. lines are accessed by dialing an access code. For
example, dial 9 to get a local outside line or dial 800–8XX for other line groups.
Each line in the system is numbered beginning with 701, and then 702, 703, etc. To
get a specific line, dial its three digit line number. If Least Cost Routing (LCR) is pro-
grammed into the system, you will only be required to dial 9.
2