Performance Data Sheet - Monogram 36" Owner's Manual

Side-by-side 36”, 42”, 48” built-in refrigerators

Installation instructions manual (98 pages)

Owner's manual (34 pages)

Owner's manual (22 pages)

Table of Contents

The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible

limit for water leaving the system as specified in NSF/ANSI Standard 42 and Standard 53. System tested and certified by NSF International against

NSF/ANSI Standard 42 and Standard 53 for the reduction of substances listed below.

Capacity 300 Gallons (1,135 Liters).

Performance Data Sheet

Substance Tested

for Reduction

Average Inﬂuent

SmartWater

Chlorine Taste and Odor

Nominal Particulate

Class I, , ≥0.5 to < 1.0 µm 7,833,333 pts/mL

Cyst*

101,000 cysts/L

The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible

Performance Data Information

Asbestos

limit for water leaving the system as specified in NSF/ANSI Standard 42 and Standard 53. System tested and certified by NSF International against

Atrazine

0.009 mg/L

NSF/ANSI Standard 42 and Standard 53 for the reduction of substances listed below.

Capacity: 300 Gallons (1,135 Liters)

Benzene

0.016 mg/L

Capacity 300 Gallons (1,135 Liters).

Carbofuran

0.08 mg/L

Endrin

0.007 mg/L

The concentration of the contaminants tested for this filter in water entering the system was reduced to

Substance Tested

Lead @ pH 6.5

0.152 mg/L

for Reduction

Average Inﬂuent

a concentration less than or equal to the permissible limit for water leaving the system as specified in

Lead @ pH 8.5

0.148 mg/L

Chlorine Taste and Odor

Lindane

0.002 mg/L

NSF/ANSI Standard 42 and Standard 53. System tested and certified by NSF International against NSF/

Nominal Particulate

Mercury @ pH 6.5

0.0058 mg/L

Class I, , ≥0.5 to < 1.0 µm 7,833,333 pts/mL

ANSI Standard 42 and Standard 53.

Mercury @ pH 8.5

0.0061 mg/L

Cyst*

101,000 cysts/L

P-Dichlorobenzene

0.222 mg/L

Tetrachloroethylene

0.015 mg/L

Asbestos

Please see geappliances.com for complete listing of the contaminants tested and the amounts reduced

Toxaphene

0.015 mg/L

Atrazine

0.009 mg/L

2,4-D

0.218 mg/L

Benzene

0.016 mg/L

*Based on the use of Cryptosporidium parvum oocysts.

Carbofuran

0.08 mg/L

Endrin

0.007 mg/L

The following pharmaceutical reduction claims have not been certiﬁed by NSF International or the state of California.

Lead @ pH 6.5

0.152 mg/L

Claims tested and veriﬁed by independent laboratory:

Lead @ pH 8.5

0.148 mg/L

Lindane

0.002 mg/L

Contaminant

Mercury @ pH 6.5

0.0058 mg/L

Reduction

Average Inﬂuent

Mercury @ pH 8.5

0.0061 mg/L

Atenolol

P-Dichlorobenzene

0.222 mg/L

Fluoxetine

Tetrachloroethylene

0.015 mg/L

Ibuprofen

Toxaphene

0.015 mg/L

Progesterone

1097 ng/L

2,4-D

0.218 mg/L

Trimethoprim

*Based on the use of Cryptosporidium parvum oocysts.

Application Guidelines/Water Supply Parameters

The following pharmaceutical reduction claims have not been certiﬁed by NSF International or the state of California.

Claims tested and veriﬁed by independent laboratory:

Service Flow

0.5 gpm (21.9 lpm)

Water Supply

Potable Water

Contaminant

Reduction

Average Inﬂuent

It is essential that the manufacturer's recommended installation, maintenance and filter replacement requirements be carried out for the product to perform as advertised.

See Installation Manual for Warranty information.

Atenolol

Fluoxetine

Note:

While the testing was performed under standard laboratory conditions,

Ibuprofen

actual performance may vary.

Progesterone

1097 ng/L

Replacement Cartridge: MWF. For estimated costs of replacement elements

please call 1-800-626-2002 or visit our website at www.geapplianceparts.com.

Trimethoprim

WARNING

To reduce the risk associated with ingestion of contaminants:

Application Guidelines/Water Supply Parameters

• Do not use with water that is microbiologically unsafe or of unknown quality

Service Flow

0.5 gpm (21.9 lpm)

without adequate disinfection before and after the system. Systems certiﬁed

Water Supply

Potable Water

for cyst reduction may be used on disinfected water that may contain ﬁlterable

cysts. EPA Establishment Number 10350-MN-005.

It is essential that the manufacturer's recommended installation, maintenance and filter replacement requirements be carried out for the product to perform as advertised.

See Installation Manual for Warranty information.

For conditions of use, health claims certified by the California Department of Public

Note:

Health, and replacements, see performance data sheet. California Department

While the testing was performed under standard laboratory conditions,

of Public Health Certification #05-1698. The contaminants or other substances

actual performance may vary.

removed or reduced by this water filter are not necessarily in all users' water.

Replacement Cartridge: MWF. For estimated costs of replacement elements

please call 1-800-626-2002 or visit our website at www.geapplianceparts.com.

WARNING

Tested and certiﬁed by NSF International

To reduce the risk associated with ingestion of contaminants:

against NSF/ANSI Standard 42 and

National Sanitation

• Do not use with water that is microbiologically unsafe or of unknown quality

Standard 53 in model GE MWF for the

Foundation

reduction of the claims speciﬁed on the

without adequate disinfection before and after the system. Systems certiﬁed

performance data sheet.

REPLACEMENT

for cyst reduction may be used on disinfected water that may contain ﬁlterable

ELEMENT

cysts. EPA Establishment Number 10350-MN-005.

For conditions of use, health claims certified by the California Department of Public

Health, and replacements, see performance data sheet. California Department

of Public Health Certification #05-1698. The contaminants or other substances

removed or reduced by this water filter are not necessarily in all users' water.

Tested and certiﬁed by NSF International

against NSF/ANSI Standard 42 and

National Sanitation

Standard 53 in model GE MWF for the

Foundation

reduction of the claims speciﬁed on the

performance data sheet.

REPLACEMENT

ELEMENT

Contaminant Reduction Determined by NSF testing.

NSF speciﬁed

Challenge Concentration

Filtration System―GE MWF Cartridge

™

2.0 mg/L

2.0 mg/L ± 10%

At least 10,000 particles/mL

Minimum 50,000 cysts/L

107 to 108 ﬁbers/L; ﬁbers

47 MF/L

greater than 10 µm in length

0.009 mg/L ± 10%

0.015 mg/L ± 10%±

Contaminant Reduction Determined by NSF testing.

0.08 mg/L ± 10%

0.006 mg/L ± 10%

NSF speciﬁed

0.15 mg/L ± 10%

Challenge Concentration

0.15 mg/L ± 10%

2.0 mg/L

2.0 mg/L ± 10%

0.002 mg/L ± 10%

0.006 mg/L ± 10%

At least 10,000 particles/mL

0.006 mg/L ± 10%

Minimum 50,000 cysts/L

0.225 mg/L ± 10%

107 to 108 ﬁbers/L; ﬁbers

0.015 mg/L ± 10%

47 MF/L

greater than 10 µm in length

0.015 mg/L ± 10%

0.009 mg/L ± 10%

0.210 mg/L ± 10%

0.015 mg/L ± 10%±

0.08 mg/L ± 10%

0.006 mg/L ± 10%

0.15 mg/L ± 10%

0.002 mg/L ± 10%

NSF speciﬁed

0.006 mg/L ± 10%

Challenge Concentration

0.006 mg/L ± 10%

978 ng/L

N/A

0.225 mg/L ± 10%

907 ng/l

N/A

0.015 mg/L ± 10%

885 ng/L

N/A

0.015 mg/L ± 10%

N/A

0.210 mg/L ± 10%

415 ng/L

N/A

NSF speciﬁed

Challenge Concentration

978 ng/L

N/A

907 ng/l

N/A

885 ng/L

N/A

415 ng/L

N/A

Average Product

Max Permissible

Avg %

Water

Reduction

Concentration

97.5%

0.05 mg/L

99.7%

18,617 pts/mL

99.99%

1 cyst/L

>99%

<1 MF/L

94.5%

0.0005 mg/L

96.7%

0.0005 mg/L

98.7%

0.001 mg/L

Average Product

Max Permissible

97.1%

0.0002 mg/L

Avg %

Water

99.3%

0.001 mg/L

Reduction

Concentration

99.3%

0.001 mg/L

97.5%

0.05 mg/L

99.0%

0.00002 mg/L

93.2%

0.0004 mg/L

99.7%

18,617 pts/mL

93.2%

0.0004 mg/L

99.99%

1 cyst/L

99.8%

0.005 mg/L

96.7%

0.0005 mg/L

>99%

<1 MF/L

93.2%

0.001 mg/L

94.5%

0.0005 mg/L

99.5%

0.0009 mg/L

96.7%

0.0005 mg/L

98.7%

0.001 mg/L

97.1%

0.0002 mg/L

99.3%

0.001 mg/L

99.3%

0.001 mg/L

Average Product

99.0%

0.00002 mg/L

Avg %

Water

93.2%

0.0004 mg/L

Reduction

Concentration

93.2%

0.0004 mg/L

99.5%

5.0 ng/L

99.8%

0.005 mg/L

99.4%

5.4 ng/L

96.7%

0.0005 mg/L

94.1%

52.3 ng/L

93.2%

0.001 mg/L

99.5%

5.0 ng/L

99.5%

0.0009 mg/L

99.5%

2.0 ng/L

Water Pressure

Water Temperature

Average Product

Avg %

Water

Reduction

Concentration

99.5%

5.0 ng/L

99.4%

5.4 ng/L

NOTICE

94.1%

52.3 ng/L

To reduce the risk associated with property damage due to water leakage:

99.5%

5.0 ng/L

• Read and follow use instructions before installation and use of this system.

• Installation and use MUST comply with all state and local plumbing codes.

99.5%

2.0 ng/L

• Do not install if water pressure exceeds 120 psi (8.2 bar). If your water pressure

exceeds 80 psi, you must install a pressure-limiting valve. Contact a plumbing

professional if you are uncertain how to check your water pressure.

• Do not install where water hammer conditions may occur. If water hammer

Water Pressure

conditions exist you must install a water hammer arrester. Contact a plumbing

Water Temperature

professional if you are uncertain how to check for this condition.

• Do not install on hot water supply lines. The maximum operating water

temperature of this ﬁlter system is 100º F (38º C).

• Protect ﬁlter from freezing. Drain ﬁlter when temperatures drop

NOTICE

below 33ºF (0.6ºC).

•

To reduce the risk associated with property damage due to water leakage:

rated capacity, or sooner if a noticeable reduction in ﬂow rate occurs.