Carephone 62
4.3
Cancel / Action button (S button)
Cancel emergency call
If you have pressed the emergency call button by mistake, you
can cancel the call with the Action button during the pre-alarm
time. Press the Action button until the unit announces "stop".
Calls cannot be cancelled after the pre-alarm time.
4.3.1
Action button: service call
You can program the Action button to act as a service button. If
you press the button and hold it for at least 2 seconds, the unit
dials a call number that has been programmed for the service
call and you hear the announcement "service call".
4.3.2
Action button: direct call
You can program the Action button to make a direct call. When
the Action button is pressed, the Carephone 62 makes one
single call to an analog telephone destination. In case of a call
sent by a direct call, the alarm can also be cancelled after the
pre-alarm. A direct call is not possible with an IP connection.
4.3.3
Action button: unit status
The Action button lights up if there is a malfunction. Press the
Action button, the status is announced.
4.3.4
Action button: manual test call
The Action button can be used to send out manual test calls.
Press the button for at least 2 seconds, the Carephone 62 will
send a manual test call. Step 71 must be set to setting 4. See
Section 6.2.4 Programming steps, page 20.
Bosch Security Systems
User Manual
Product Description | en
F.01U.141.162 | V5 | 2014.09
9