Connection Diagrams And Systems; Recommended Equipment - Lincoln Electric POWER WAVE I400 Operator's Manual

A-6
CONNECTION DIAGRAMS AND SYSTEM
System Part No.
Identifier
Power Source K2669-1
Integration Kit K2677-2
Wire Drive K2685-1
Power Source
to Wire Drive K1785-xx 1
Control Cable
K2163-xx
Weld Cables
-or-
K1842-xx
Robot Arm Kxxxx
Robot Controller Kxxxx
Torch
Kxxxx
1 Maximum length 100 ft.(30.5 m) Cannot be connected end to end.
System Part No.
Identifier
Sense Lead Kit K940-xx
DeviceNet Kit K2780-1
Sync-Tandem Kit K2781-1
CE Filter Kit K2670-1
ArcLink Digital K1543-xx 2
Communication
K2683-xx 2
Cable
Consult
External Ethernet
Automation
Network Equipment
Division
DeviceNet Cables
Customer
and Accessories
Supplied
2 Cables can be connected end to end to extend length (recommended maximum 200 ft [61.0m]).
INSTALLATION

RECOMMENDED EQUIPMENT

POWER WAVE
(includes S26064 POWER WAVE
IIntegration Kit for Fanuc R30iA / R30iB Controller. Includes industrial ethernet cable,
power cable, protective grommets, mounting plate, and dust proof strain relief.
K2163 Series cables sold in pairs.
K1842 Series cables sold individually.
See Price Book for details and bulk cable availability.
OPTIONAL EQUIPMENT
Remote Sense Lead Kit. Recommended for sensitive or critical applications to more accurately monitor the
arc voltage.
DeviceNet Kit. Allows Power Wave i400 to communicate via DeviceNet protocol.
Sync-Tandem Kit. Allows two Power Wave i400s to perform synchronized tandem pulse welding. Includes all
necessary harnesses and cabling for 2 machines. Also provides access to special Sync-Tandem welding soft-
ware.
CE Filter Kit. Required to meet CE and C-Tick conducted emission requirements. Input voltage limited to
380-415/3/50/60 with kit installed
ArcLink Control Cable (5 pin). Required for earlier controllers communicating via traditional ArcLink
standard 2 wire CAN based network.
K2683 Recommended on Sever Duty application.
Ethernet Switch, Cables, etc. Required for external Ethernet system connectivity typically associated with
multiple arm or multiple power source applications.
DeviceNet Cables, Tees, and Terminators (5 pin sealed "mini style") Typically required for PLC or earlier
model controllers communicating via DeviceNet.
For additional information refer to the "DeviceNet Cable Planning and Installation Manual" (Allen Bradley pub-
lication DN-6.7.2).
POWER WAVE
Description
i400 Power Source
®
® Utilities CD)
AutoDrive 4R220 Wire Drive
Feeder Control Cable (14 pin).
Welding Power Cables
Power Source to Wire Drive,
and Power Source to Work
Consult Automation Division
Description
i400
®
A-6
® over a