Routing - D-Link DSL-2600U User Manual

DSL-2600U ADSL/Ethernet Router with Wi-Fi
User Manual

Routing

On the Advanced / Routing page, you can add static routes (routes for networks that are not
connected directly to the device but are available through the interfaces of the device) into the
system.
To create a new route, click the Add button.
You can specify the following parameters:
Parameter
Destination network
Destination netmask
Gateway
Metric
Via Interface
Click the Save button.
Figure 78. The Advanced / Routing page.
Figure 79. The page for adding a static route.
A destination network to which this route is assigned.
The destination network mask.
An IP address through which the destination network can be
accessed. The field is displayed when the <Auto> value is selected
from the Via Interface drop-down list.
A metric for the route. The lower the value, the higher is the route
priority. Optional.
Select an interface (connection) through which the destination
network can be accessed from the drop-down list. If you have
selected the <Auto> value of this drop-down list, the router itself
sets the interface on the basis of data on connected networks.
Page 86 of 112
Configuring via Web-based Interface
Description