Before Making Connections and Specifying Settings
1.4
Preparing the LAN Cable and IP Address
In order to use the network application functions, a LAN cable and a
registered IP address are required.
The LAN cable is not included; it must be prepared by the user.
Note
The LAN cable should be a cable for Fast Ethernet 100BASE-TX
(Category 5).
1.5
Acceptance of the End User License Agreement
In order to use the network functions, you must agree not to make illegal
copies of or pass to unlicensed persons the software provided with the
device or the software included on the CD-ROM. Before using these
functions, you must read the enclosed End User License Agreement and
agree to the terms of use for the software.
1.6
Compatible Operating Systems
Utility
IP Scanner
Network FAX
* Network FAX is not supported by Windows® 95.
1.7
Operating Environment of Utilities
Processor
Memory
Hard disk free space
* 64 MB or more (128 MB recommended) for Windows® XP or Windows® 2000
im2020, im2520, im2520f, im3520
Operating System
Windows® Me/Windows® 98/Windows® 95/Windows® 2000/
Windows® NT4.0/Windows® XP
Windows® Me/Windows® 98/Windows® XP/Windows® 2000/
Windows® NT4.0
Network FAX application
Pentium 133 MHz or higher
24 MB or more
(48 MB recommended)
50 MB or more
IP Scanner
32 MB or more
(64 MB recommended)*
1
1-5