When your computer is connected to an electrical outlet or docking device, the Network Disabled power scheme disables only your wireless activity. You

must set the power scheme through QuickSet (not Microsoft® Windows®) for the Network Disabled power scheme to work.

The screen allows you to select, create, and edit power scheme settings. In addition, you can delete power schemes that you create, but you cannot delete

Dell™ QuickSet predefined power schemes (Maximum Battery, Maximum Performance, Presentation, and Network Disabled).

NOTE:

QuickSet automatically adds the word (QuickSet) after the names of power schemes created using QuickSet.

All QuickSet power schemes are displayed in a drop-down menu near the center of the screen. The power settings for each scheme in the menu are listed

below the menu. The power settings are listed separately for when the computer is running on battery or connected to an electrical outlet.

The Power Management Wizard also allows you to associate the display brightness level with a power scheme. You must enable brightness-level power

schemes through QuickSet in order to set the brightness level.

The display brightness, internal network-card activity, and wireless activity features are not available through the Control Panel power schemes. In order to

make use of these value-added features, you must set them through QuickSet power schemes.

NOTE:

Brightness shortcut keys only affect the display on your portable computer, not monitors that you attach to your portable computer or docking

device. If your computer is in CRT only mode and you try to change the brightness level, the Brightness Meter appears, but the brightness level on the

monitor does not change.

Setting Battery Alarms and Actions

The screen allows you to enable the low-battery and critical-battery alarms and to change settings for the alarms. For example, you can set the low-battery

alarm to 20 percent to remind you to save work and switch to AC power, and you can set the critical-battery alarm to 10 percent to enter hibernate mode.

From the screen, you can:

Select whether the alarm will notify you by sound or text.

Adjust the power level at which you want the alarm to notify you.

Select how the computer will respond when the alarm notifies you:

Choose no action.

Enter standby mode.

Enter hibernate mode.

Shut down Windows and turn off the computer.

Completing the Power Management Wizard

The screen summarizes the QuickSet power scheme, sleep mode, and battery alarm settings for your computer. Review the settings you have selected and

click Finish.

For more information about QuickSet, right-click the

Power Management Modes

Standby Mode

Standby mode conserves power by turning off the display and the hard drive after a predetermined period of inactivity (a time-out). When the computer exits

standby mode, it returns to the same operating state it was in before entering standby mode.

NOTICE:

If your computer loses AC and battery power while in standby mode, it may lose data.

To enter standby mode:

Click the Start button, click Turn off computer, and then click Stand by.

Depending on how you set the power management options on the

methods:

Press the power button.

icon in the taskbar and click Help.

Advanced tab

in the Power Options Properties window, use one of the following

Table of Contents