Samsung Xpress M262x Series User Manual page 111

Installing driver over the network
Command- line Definition
/s or Starts silent installation.
/S
/p"<port name>" or Specifies printer port.
/P"<port name>"
Network Port will
be created by use
of Standard TCP/IP
Port monitor. For
local port, this port
must exist on
system before
being specified by
command.
Description
Installs machine drivers
without prompting any UIs
or user intervention.
Printer port name can be
specified as IP address,
hostname, USB local port
name, IEEE1284 port name or
network path.
For example:
• /p"xxx.xxx.xxx.xxx" in
where, "xxx.xxx.xxx.xxx"
means IP address for
network printer. /
p"USB001", /P"LPT1:", /
p"hostname"
• /
p"\\computer_name\shar
ed_printer" or
"\\xxx.xxx.xxx.xxx\shared
_printer" in where,
"\\computer_name\share
d_printer" or
"\\xxx.xxx.xxx.xxx\shared
_printer" means the
network path to the
printer by entering two
slashes, the computer
name or local IP address of
the PC sharing the printer,
and then the share name
of the printer.
Command- line Definition
/a"<dest_path>" or Specifies destination path
for installation.
/A"<dest_path>"
The destination
path should be a
fully qualified
path.
/n"<Printer name>" Specifies printer name.
or Printer instance shall be
created as specified
/N"<Printer name>"
printer name.
/nd or Commands not to set the
installed driver as a default
/ND
machine driver.
Description
Since machine drivers should
be installed on the OS
specific location, this
command applies to only
application software.
With this parameter, you can
add printer instances as your
wishes.
It indicates installed machine
driver will not be the default
machine driver on your
system if there are one or
more printer drivers
installed. If there is no
installed machine driver on
your system, then this option
won't be applied because
Windows OS will set installed
printer driver as a default
machine driver.
2. Using a Network-Connected Machine
111