Data Roam Guard; Share & Connect; Smartshare Beam - LG G3 Vigor User Manual

Note: Call Guard is turned on by default on your phone. Voice dialing and speed dialing are not available
when you are roaming with Call Guard enabled.
To place roaming calls with Call Guard on:
1. Tap > .
2. Enter 1 + area code + the seven-digit number and tap
To answer incoming roaming calls with Call Guard on:
1. Swipe in any direction. A message will be displayed notifying you that roaming charges will
apply.
2. Tap Yes.

Data Roam Guard

Depending on service availability and roaming agreements, your phone may be able to access data
services while roaming on certain digital systems. You can set your phone to alert you when you are
roaming off the home network and try to use data services such as messaging.
Note: Data Roam Guard is turned on by default on your phone.
To set your Data Roam Guard notification:
1. Tap >
2. Tap the Domestic data roaming, International data roaming checkboxes or both to place a
checkmark and activate the function.
To use data services when Data Roam Guard is active:
●
When a pop-up notification appears informing you that data roam charges may apply, tap
Connect or Always Connect to connect.
Share & Connect
Your phone lets you use the wireless technology that enables data transmission between devices using
Wi-Fi, etc.

SmartShare Beam

Turn on to receive multimedia contents via SmartShare Beam from LG phones or tablets.
Turn On SmartShare Beam
1. Tap >
2. Tap the SmartShare Beam and tap the SmartShare Beam switch
Settings
> Settings > Roaming > Roaming guard.
> Settings > Share & connect.
.
to activate the feature.
143