Seat Heating; Seat And Mirror Memory - BMW 318i Owner's Handbook Manual

Seat heating*

Press once per temperature stage.
Three LEDs indicate the highest temperature.
To switch off:
Press and do not immediately release the but-
ton.
If you continue driving within approx. 15 min-
utes, the seat heating is automatically activated
at the previously set temperature.

Seat and mirror memory*

You can store and call up two different combi-
nations of driver's-seat and outside-mirror
positions.
Settings for the seat back width and lumbar
support are not stored in memory.
Memorising
1. Switch on radio readiness or the ignition,
see page 45.
2. Adjust the seat and outside mirrors to the
desired positions.
3. Press the button.
The LED in the button comes on.
36
Online Edition for Part no. 01 41 0 013 257 - © 02/07 BMW AG
4. Press the desired memory button 1 or 2: the
LED goes out.
The driver's seat and outside mirror posi-
tions are stored for the remote control cur-
rently in use.
Calling up
Do not call up memory while you are driv-
ing, as unexpected seat movement could
result in an accident.<
Convenience function
1. Unlock and open the driver's door or switch
on radio readiness, see page 45.
Briefly press the desired memory button 1
2.
or 2.
The adjusting procedure is halted immediately
when you press a seat adjustment switch or
touch one of the memory buttons.
Safety function
1. Close the driver's door and switch the igni-
tion on or off, see page 45.
2. Press the desired memory button 1 or 2
until the adjusting procedure is completed.
If the button was pressed accidentally:
press the button again; the LED will go out.
Calling up with the remote control
The driver's seat position last set is stored for
the remote control currently in use.
You can select the occasion on which the seat is
reset to that position.
> Call-up when the vehicle is unlocked.
> Call-up when the driver's door is opened.
When this Personal Profile function is
used, first make sure that the footwell
behind the driver's seat is free of obstacles.
Otherwise, persons could be injured or objects
could be damaged should the seat start to
move towards the rear.<
The adjusting procedure is halted immediately
when you press a seat adjustment switch or
touch one of the memory buttons.