Location Of The Spare Tire And Tools; Removing The Jack And Tools; Removing The Spare Tire - Lincoln Navigator Owner's Manual

Roadside Emergencies

Location of the spare tire and tools

The spare tire and tools for your vehicle are stowed in the following
locations:
Item
Spare tire
Jack tools and jacking instructions Under the access panel located in

Removing the jack and tools

1. Open the liftgate, then locate the access panel on the floor behind the
3rd row seat. Unlatch and remove the panel.
2. Remove the jack and tools assembly tray from the compartment by
turning the wing-nut counterclockwise to relieve tension against the jack
assembly tray.
3. Unsnap the wheel lug nut wrench, jack extension and handle from the
plastic tray. Remove the jack and instruction sheet from the tray
assembly.

Removing the spare tire

1. Fold the rear seat down. Refer to
Rear seats in the Seating and
safety restraints chapter.
2. Remove the jack handle and
winch extension from the tray and
assemble them.
3. Open the spare tire winch access
plug in the bottom of the
compartment located behind the 3rd
row seat, very close to the jack and
tools tray.
4. Insert the winch extension tool
assembly through the access hole in
the floor and engage the winch.
5. To remove the spare tire, turn the handle counterclockwise until the
tire is lowered to the ground and the cable is slightly slack.
6. Slide the retainer through the center of the spare tire wheel.
290
Location
Under the vehicle, just forward of
the rear bumper
the floor compartment behind the
rear seat